- 您现在的位置：买卖IC网 > Sheet目录1006 > RP1-H-5V (Panasonic Electric Works)RELAY RF SPDT 100MA 5V
RP
NOTES
1. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different. The nominal operating voltage
should be applied to the coil for more
than 20 ms to set/reset the latching type
relay.
2. Coil connection
When connecting coils, refer to the wiring
diagram to prevent mis-operation or
malfunction.
5. Automatic mounting
To maintain the internal function of the
relay, the chucking pressure should
not exceed the values below.
Chucking pressure* in the direction A:
4.9 N {500 gf} or less
Chucking pressure* in the direction B:
9.8 N {1 kgf} or less
Chucking pressure* in the direction C:
9.8 N {1 kgf} or less
Please chuck the portion.
Avoid chucking the center of the relay. In
addition, excessive chucking pressure to
the pinpoint of the relay should be
avoided.
For general cautions for use, please
refer to the “General Application
Guidelines”.
B
3
3. External magnetic ?eld
Since RP relays are highly sensitive
polarized relays, their characteristics will
be affected by a strong external magnetic
A
(4)
(5)
(6)
C
mm inch
? Direction A ? Direction B ? Direction C
6 5 4
.118
6
?eld. Avoid using the relay under that
condition.
1
2
3
1 2 3
.236
4. Packing direction
Relays are packed in a tube with the
orientation stripe (PIN NO. 1) toward the
green stopper.
*Value of chucking pressure is shown by the value of weight
pressed on the portion (4 mm .157 inch dia.).
6. Soldering
Preheat according to the following
conditions.
Stopper (gray)
Stopper (green)
Temperature
120°C 248°F or less
Orientation (indicates PIN No.1) stripe
Time
Within 2 minute
Soldering should be done at 260±5°C
500±9°F within 6 s.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
ASCTB72E 201201-T
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
RP1005S-1R0-F
RES HP 1.0 OHM 1/6W 1% 0402 SMD
RP3SL005
RELAY GEN PURPOSE SPST 16A 5V
RP411110
RELAY GEN PURPOSE SPDT 8A 110V
RP43737R0050GTTR
RES 50 OHM 2% 40W SMD
RP60870R0100JNBK
RES 100 OHM 5% 150W FLANGE
RP820110
RELAY GEN PURPOSE DPDT 8A 110V
RP820730
RELAY GEN PURPOSE DPDT 8A 230V
RP92010T0050GTTR
RES TERM 50 OHM 10W 2GHZ
相关代理商/技术参数
RP1-H-6V
功能描述:高频/射频继电器 RELAY HI FREQ 6VDC SELF-CLINCH
RoHS:否 制造商:Omron Electronics 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 VDC 线圈类型:Non-Latching 频率: 功耗:100 mW 端接类型:Solder Terminal 绝缘:20 dB to 30 dB at 1 GHz 介入损耗:0.2 dB at 1 GHz
RP1-H-9V
功能描述:高频/射频继电器 RELAY HI FREQ 9VDC SELF-CLINCH
RoHS:否 制造商:Omron Electronics 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 VDC 线圈类型:Non-Latching 频率: 功耗:100 mW 端接类型:Solder Terminal 绝缘:20 dB to 30 dB at 1 GHz 介入损耗:0.2 dB at 1 GHz
RP1HT
制造商:Panasonic Industrial Company 功能描述:DIODE
RP1HV
制造商:Panasonic Industrial Company 功能描述:DIODE
RP1L055SNTR
制造商:ROHM Semiconductor 功能描述:MOSFET N-CH 60V 5.5A MPT6
RP1L080SN
制造商:ROHM 制造商全称:Rohm 功能描述:4V Drive Nch MOSFET
RP1L080SNTR
制造商:ROHM Semiconductor 功能描述:MOSFET N-CH 60V 8A MPT6
RP1P5
制造商:RECOM 制造商全称:Recom International Power 功能描述:1.5 Watt DIP24 & SMD, Single & Dual Output